To obtain access to full text of journal and articles you must register!
- Article name
- Out-of-autoclave prepreg formation
- Authors
- DONETSKIY K. I., , doneckijki@viam.ru, All-Russian Scientific Research Institute of Aviation Materials of National Research Center "Kurchatov Institute", SRC RF, Moscow, Russia
TIMOSHKOV P. N., , timoshkovpn@viam.ru, All-Russian Scientific Research Institute of Aviation Materials of National Research Center "Kurchatov Institute", SRC RF, Moscow, Russia
SAFRONOV A. M., , krasssaa@gmail.com, All-Russian Scientific Research Institute of Aviation Materials of National Research Center "Kurchatov Institute", SRC RF, Moscow, Russia
GONCHAROV V. A., , goncharovva@viam.ru, All-Russian Scientific Research Institute of Aviation Materials of National Research Center "Kurchatov Institute", SRC RF, Moscow, Russia
MISHCHUN M. I., , mishun.mihail@yandex.ru, All-Russian Scientific Research Institute of Aviation Materials of National Research Center "Kurchatov Institute", SRC RF, Moscow, Russia
- Keywords
- polymer composite materials / non-autoclave molding / vacuum prepregs / semi-pregs / physical and mechanical properties / impregnation / porosity
- Year
- 2022 Issue 1 Pages 29 - 34
- Code EDN
- Code DOI
- 10.52190/2073-2562_2022_1_29
- Abstract
- Considered process of manufacturing carbon fiber by vacuum forming prepregs. The reasons for the formation of porosity in carbon fiber, the preparation of raw materials for the manufacturing process of the material - carbon fabric and prepreg, as well as the technology of manufacturing prepreg and polymer composite material (PCM) based on it are considered. The physicomechanical properties of the resulting material, both elementary samples and a structurally similar element of the product, are investigated. A comparison of the properties of carbon fiber produced by both vacuum and autoclave molding prepreg.
- Text
- BUY for read the full text of article
- Buy
- 500.00 rub
