THE LAST ISSUE OF THE JOURNAL
“COMPOSITE MATERIALS CONSTRUCTIONS”
(No 2. 2026)
16.06.2026
| Journal name | COMPOSITE MATERIALS CONSTRUCTIONS |
| ISSN | 2073-2562 | Data | 2 quarter 2026 |
| Volume | Issue | 2 | |
| Page | 1-70 | Articles number | 10 |
C O N T E N T S
| N | Article name | Page | |
| STUDY OF STRESS-STRAIN STATE AND STRUCTURES CALCULATION | |||
| 1 | Calculation by Bubnov-Galerkin method of non-linear deformation of the orthotropic shell of revolution under the action of non-stationary pressure
OSTRIK A. V. (Federal research center of problems of chemical physics and medical RAS; Central Research Institute for Special Machinery) NIKOLAEV D. N. (Federal research center of problems of chemical physics and medical RAS) NEKRASOV M. A. (Central Research Institute for Special Machinery) STEPYGIN V. I. (Central Research Institute for Special Machinery) | 3-10 | |
| MODELING OF MATERIALS, PROCESSES AND STRUCTURES | |||
| 2 | Numerical simulation of the glass-fiber containers post starting water flood
PEGOV V. I. (Joint Stock Company "Academician V. P. Makeyev State Rocket Centre"; South Urals Federal Research Center of Mineralogy and Geoecology of the Urals Branch of RAS) SERGEEVA А. А. (Joint Stock Company "Academician V. P. Makeyev State Rocket Centre") | 11-14 | |
| 3 | Early warning signals for composite material failure in the context of self-organized criticality theory
DMITRIEV A. V. (MIREA - Russian Technological University) BATIENKOV R. V. (MIREA - Russian Technological University) | 15-20 | |
| METHODS OF STRUCTURES DESIGN | |||
| 4 | Design of lattice composite shear web for an airplane wing
BABICHEV A. A. (Central Research Institute for Special Machinery) | 21-25 | |
| TECHNOLOGY OF MANUFACTURING, PROCESSING AND JOINT OF ARTICLES | |||
| 5 | New method of forming products from epoxy resin
ERENKOV O. Yu. (Pacific National University) ISAEV S. P. (Pacific National University) POTAPENKO B. I. (Pacific National University) YAVORSKY D. O. (Pacific National University) | 26-30 | |
| 6 | Design options for shell structures of composite reflectors reinforced with stiffening ribs
DENISOV A. V. (LLC "SDTB "Plastic") LAYKOVA O. G. (LLC "SDTB "Plastic") MITYUSHKINA D. V. (LLC "SDTB "Plastic") DENISOVA M. A. (LLC "SDTB "Plastic") Zaichenko A. S. (LLC "SDTB "Plastic") | 31-40 | |
| 7 | An orthogonal classification of 3D printing methods for composite materials and types of structural defects
YUDIN A. V. (Federal Research Centre "The Southern Scientific Centre of the RAS") | 41-48 | |
| INVESTIGATION METHODS OF COMPOSITE MATERIALS PROPERTIES | |||
| 8 | Phase diagrams of the component composition of bitumen-polymer mixtures based on butadiene-styrene thermoplastic elastomers
NEBRATENKO D. Yu. (D. I. Mendeleev Russian Institute of Chemical Technology) LYAMKIN D. I. (D. I. Mendeleev Russian Institute of Chemical Technology) PETROV V. A. (D. I. Mendeleev Russian Institute of Chemical Technology) ROZHKOV I. M. (Autonomous Non-profit Organization «Scientific Research Institute of Transport and Construction Complex») POTAPOV E. E. (MIREA - Russian Technological University) | 49-55 | |
| 9 | Computational and experimental study of the effect of nanoparticle modification of composite materials on mechanical properties: a case study of laying the spar of a long-range civil aviation aircraft
KOVTUNOV S. S. (Moscow Aviation Institute (National Research University)) GRIBTSOV D. D. (Moscow Aviation Institute (National Research University)) KUDELYA T. M. (Moscow Aviation Institute (National Research University)) | 56-61 | |
| 10 | Comparative analysis of static and fatigue strength characteristics of carbon fiber reinforced polymer modified single walled carbon nanotubes
KOVTUNOV S. S. (Moscow Aviation Institute (National Research University)) TOROPYLINA E. Yu. (Moscow Aviation Institute (National Research University)) RODIN N. A. (Moscow Aviation Institute (National Research University)) | 62-70 | |
